2013-05-23

Investigating 5 axis CNC milling


Motivation


Since I have a 4 axis CNC machine and already converted the electronics to USB and am working on a 4/5/6 axis CAM program, let's investigate what would be involved to upgrade to 5 axis machining!

Current setup


I have a YOOCNC CNC6040 from carving-cnc.com with the 4th axis option.
The 4th axis is very weak and nearly unusable.

I have lisended MACH3 as  control software and am very happy with it.

 Mechanics


Electronics


Antonio Eduardo Martins Palmeira pointed me at the PLCM-E3P CNC Controller (For use with Mach3).
Let's see...

5V DC via XP9 or
5V from USB or
48V via Ethernet (PoE)

Maximum frequency of STEP signals 100 kHz (my current board does 200KHz pulses)
15 buffered CMOS(5V) inputs
36 buffered CMOS(5V, 10mA) outputs
6 axis
extra status LED connectors (connect, estop, power, traffic)
max 2500ms buffer on card in addition to max 5000ms buffer in MACH3
logging can be enabled for debugging
The controller does the actual step generation using it's own clock and the acceleration profile provided by MACH3.
It also does probing and limit switches by it's own (no software=no delay)

Stepper driver

TODO

Keine Kommentare: